Go to the Previous PageGo to the Main ViewGo to the Next PageGo to a printer friendly version of this document
Chapter B Using the Printer Driver
(C5150n-C5200ne/C5200n User's Guide)
Duplex Printing (Printing on Both Sides of the Paper)
NOTE
    The optional duplex unit must be installed in the printer and enabled before duplex printing can be carried out.
NOTE
    These instructions explain how to change the settings as you are printing a job. If you wish to change the settings to apply to all jobs:
    • Click Start --> Settings --> Printers.
    • Right click the appropriate printer name, then select Properties.
    • Click Printing Preferences.
    • Follow steps 3, etc., below. Note that the Properties screen for setting defaults will have more tabs.

1. Open the file in your application and select File --> Print.

2. In the Print dialog box, select the Oki C5100 printer.

3. On the Setup tab, under 2-Sided Printing, select Long Edge or Short Edge.


4. Click Print.

Oki Data has taken care to insure that the information is complete, accurate and up-to-date. However, Oki Data assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of Oki Data.
Copyright 2021, Oki Data, Americas, Inc.