Go to the Previous PageGo to the Main ViewGo to the Next PageGo to a printer friendly version of this document
Chapter 5 Using Your Printer
(Users Manual ML320/ML321 Turbo)
Menu Settings Table
For a complete explanation of each menu item, refer to "Using Your Printer, Menu Mode, Explanations of Menu Items."

The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.

GroupItemSettings (Defaults are set in bold italic)
Printer ControlEmulation ModeIBM PPR, EPSON FX, ML
FontPrint ModeUtility, NLQ Courier, NLQ Gothic, Draft
Draft ModeHSD, SSD
Pitch10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi
Proportional SpacingNo, Yes
StyleNormal, Italics
SizeSingle, Double
Symbol SetsCharacter SetStandard, Line Graphics, Block Graphics
Language SetAmerican, French, German, British, Danish I, Swedish, Italian, Spanish I, Japanese, Norwegian, Danish II, Spanish II, Latin American, French Canadian, Dutch, Publisher
Zero CharacterSlashed, Unslashed
Code PageUSA, Canada French, Multilingual, Portugal, Norway, BRASC II, Abicomp
Rear FeedLine Spacing6 LPI, 8 LPI
Form Tear-OffOff, 500 mS, 1 sec, 2 sec
Skip Over PerforationNo, Yes
Page Width (wide model only)13.6", 8"
Page Length11", 11-2/3", 12", 14", 17", 3", 3.5", 4", 5.5", 6", 7", 8", 8.5"
Bottom feedLine Spacing6 LPI, 8 LPI
Form Tear-OffOff, 500 mS, 1 sec, 2 sec
Skip Over PerforationNo, Yes
Page Width (wide model only)13.6", 8"
Page Length11", 11-2/3", 12", 14", 17", 3", 3.5", 4", 5.5", 6", 7", 8", 8.5"
Top FeedLine Spacing6 LPI, 8 LPI
Bottom MarginValid, Invalid
Page Width (wide model only)13.6", 8"
Page Length11", 11-2/3", 12", 14", 17", 3", 3.5", 4", 5.5", 6", 7", 8", 8.5"
Wait Time500 mS, 1 sec, 2 sec
Page Length ControlBy MENU Setting, By Actual Page Length
SetupGraphicsBi-directional, Uni-directional
7 or 8 Bit Graphics*8, 7
Receive Buffer Size1 Line, 16K, 28K, 64K
Paper Out OverrideNo, Yes
Print Registration0, set in 0.05 mm increments: press SEL to shift registration to the left; press SHIFT + SEL to shift registration to the right.
7 or 8 Bits Data Word*8, 7
Operator Panel FunctionFull Operation, Limited Operation
Reset InhibitNo, Yes
Print Suppress EffectiveYes, No
Auto LFNo, Yes
Auto CR+No, Yes
Print DEL Code*No, Yes
SI Select Pitch (10 cpi)+17.1 cpi, 15 cpi
SI Select Pitch (12 cpi)+20 cpi, 12 cpi
Time Out PrintValid, Invalid
Auto SelectNo, Yes
Centering PositionDEFAULT, MODE1, MODE2
ESC SI Pitch17.1 cpi, 20 cpi
ParallelI-PrimeBuffer Print, Invalid, Buffer Clear
Pin 18+5V, Open
Auto Feed XT**Invalid, Valid

* Appears only when the MICROLINE Standard emulation is selected.
+ Appears only when the IBM emulation is selected.
** Applies only when the Epson emulation is selected.
Oki Data has taken care to insure that the information is complete, accurate and up-to-date. However, Oki Data assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of Oki Data.
Copyright 2014, Oki Data, Americas, Inc.